松田先生~ coating question

If I want to add a layer of clear coat to the rod tip of a 前 打 rod (main purpose is to prevent the white color from changing to yellowish color), can I use the clear coat made by Tamiya for model cars?

Any other product would you suggest?

Thanks~

take a look at this

http://www.fishinghk.com/forum/v ... page%3D4&page=1

唉...唔識睇英文tim....

原帖由 stevenl_604 於 2007-10-1 17:03 發表

                               
登錄/註冊後可看大圖

If I want to add a layer of clear coat to the rod tip of a 前 打 rod (main purpose is to prevent the white color from changing to yellowish color), can I use the clear coat made by Tamiya for model ca ...

604兄~
環氧樹脂唔變黃好難架，爭在使用時間長定短(如果白色竿身重明顯)，而所講既雙星主要係模型專用，用係魚竿冇咁好，因附注力不足~

原帖由 松田先生 於 2007-10-2 11:28 發表

                               
登錄/註冊後可看大圖

604兄~
環氧樹脂唔變黃好難架，爭在使用時間長定短(如果白色竿身重明顯)，而所講既雙星主要係模型專用，用係魚竿冇咁好，因附注力不足~

如果想冇咁快變黃，用toho既環氧樹脂做coat啦~

Thanks thanks~

That means it will become yellowish anyway right? just slower....

冇辦法啦，針冇兩頭利!!
你可以睇返D舊竿，例如 Ryobi 既前打竿，白色竿身，用得幾年已經變黃!!
不過我要清楚說明一點，係(【環氧樹脂】=【厚之漆】)會變黃，並唔係顏料!!

Yellowing of the finish can result from reaction with lacquer base color preservers, incomplete mixing, or unequal portions of resins A and B.

松田兄﹐尼D係其中一間做桿 coating公司既 tips, 吾知係吾係正確呢﹐同埋而家有幾隻coating都有加上UV保護料﹐對變黃方面有無用呢﹖

原帖由 松田先生 於 2007-10-3 09:30 發表

                               
登錄/註冊後可看大圖

冇辦法啦，針冇兩頭利!!
你可以睇返D舊竿，例如 Ryobi 既前打竿，白色竿身，用得幾年已經變黃!!
不過我要清楚說明一點，係(【環氧樹脂】=【厚之漆】)會變黃，並唔係顏料!! ...

Steven!!!  See!  The same comment from " Professional " s.   Forget about the yellowish outlook which will not harm!  The more coating you put on the tip, the less sensitive your rod will be!  Just think of how to catch a fish rather than on the appearance!!!!  

http://www.u-40.com/permagloss.html

how about this? as this is not epoxy