搜索

[釣具] 請大家俾D意見![極覇光ヘチ]

[複製鏈接]
Ronson 發表於 29/10/2007 17:59:40 | 顯示全部樓層 |閱讀模式 IP:- 香港
想買呢支竿玩下,大家可以俾D意見我嗎?
http://fishing.daiwa21.com/index.asp?ItemID=2608

[ 本帖最後由 DriftsinkAngler 於 2007-10-29 18:50 編輯 ]
stevenl_604 發表於 29/10/2007 18:20:33 | 顯示全部樓層 IP:- 香港

回復 #1 Ronson 的帖子

I tried this rod during Daiwa's show and feel that it is good in every aspects (good balance, strong middle
section) but the rod tip is quite hard.  I remember you said you bought the rod X39-45 and I would say that this rod's tip is almost as hard as the X.  Not sure if it is designed to be like that but I am a bit worried that the tip is not sensitivie enough.  I have seen one of Sakura's hechi rods and its tip is very sensitive.  Anyway, that is just my very limited input as I don't have much experience with Hechi rods.

Let's see if other hechi masters will have other input.
coolfire 發表於 29/10/2007 21:18:35 | 顯示全部樓層 IP:- 香港
我渣過一支3m既....竿先表現真係出孚意料地硬...感覺上用係前打比較困難, 落進目印會好o的...
dennis 發表於 29/10/2007 21:42:00 | 顯示全部樓層 IP:- 台灣台北
建議G牌的會比較容易上手!
hechi 發表於 29/10/2007 22:28:54 | 顯示全部樓層 IP:- 香港
極覇光ヘチ頭節已是各廠竿較軟一支,3.1m全是行sic guide。笑
stevenl_604 發表於 29/10/2007 22:54:57 | 顯示全部樓層 IP:- 香港

回復 #5 hechi 的帖子

Good info.  Do you know if tips of 黒鯛工房's hechi rods are harder?
hechi 發表於 29/10/2007 23:20:43 | 顯示全部樓層 IP:- 香港

回復 #6 stevenl_604 的帖子

黒鯛工房/sakura(金x)/G馬/Ryobi/Shimano/日新/daiwaへチ頭節硬(和前打頭節比)。
黑調工房0.5mm頭節都硬

[ 本帖最後由 hechi 於 2007-10-29 23:23 編輯 ]
DriftsinkAngler 發表於 29/10/2007 23:27:32 | 顯示全部樓層 IP:- 香港

回復 #7 hechi 的帖子

請教Hechi師兄

點解Hechi竿先要做到咁硬呢????
hechi 發表於 29/10/2007 23:31:40 | 顯示全部樓層 IP:- 香港

回復 #8 DriftsinkAngler 的帖子

我信係到手好D..笑

[ 本帖最後由 hechi 於 2007-10-29 23:33 編輯 ]
DriftsinkAngler 發表於 29/10/2007 23:36:53 | 顯示全部樓層 IP:- 香港

回復 #9 hechi 的帖子

係魚訊傳到手好D??
您需要登錄後才可以回帖 登錄 | 魚民註冊

本版積分規則

手機版|聯繫魚樂網|FISHINGHK.com™  

GMT+8, 9/5/2025 20:29 , Processed in 0.180765 second(s), 78 queries , Gzip On.

Powered by Discuz! X3.5 © 2001-2017 Comsenz Inc.

System by FISHINGHK.com Since 2007-2-16

快速回復 返回頂部 返回列表