絞既問題

啤呤姐係咩-v-     點樣可以啤呤數目高d???

通常係轉動位置,軸芯與Ｃ套會加上去,可以轉動時吏加順暢,磨擦少d

原帖由 lokman1314 於 23/9/2008 19:34 發表

                               
登錄/註冊後可看大圖

啤呤姐係咩-v-     點樣可以啤呤數目高d???

啤呤係英文 bearing 直譯而成 … 正式叫軸承
樣就睇圖
同啤呤同 size 但係得一粒實芯o既o野就叫杯士 … 作用都係同啤呤一樣 … 但就順暢度就唔夠啤呤好

要啤呤數目高 D 方法
1) 買高級 D 通常會多 D
2) 自己改 … 張杯士變為同 size o既啤呤就可以

但係咪越多就越好呢？ 呢個自己考慮啦！

姐係點-.-???  點先改到多D啤呤

原帖由 lokman1314 於 24/9/2008 18:36 發表

                               
登錄/註冊後可看大圖

姐係點-.-???  點先改到多D啤呤

首先要好清楚隻攪係點結構…唔係拆散左想裝番埋你都幾頭痕
其次就係搵出各軸芯位有冇位置係用杯士o既 … 杯士會係用膠或者用金屬造都有
跟住就用卡尺度準各杯士 size (通常係內徑、外徑同埋厚度)
再去專門啤呤舖配齊先可以改
改就簡單…用啤呤代替杯士就得
跟住裝番埋就完成

記住 … 呢個係理論上越多啤呤就會越暢順 … 但實質會因唔同機械結構或所用物料而有所改變

祝好運

HI ! I don't agreed you add more bearing in you reel  because you were waste you money and time but if you still want more bearing on to you reel , you should buy a new Shimano or Daiwa reel.
Shimano- Stella reel 14-15 B/B
Daiwa    - Branzino   11CRBB
Daiwa    - Saltiga      14+1 B/B

Shimano- Anti Rust Bearings ( A-RB)  The secret of long- term rotation performance is to prevent any form of rust, corrosion or oxidisation of the bearings, which can cause a reduction in the reel's performance over time.

Daiwa- The CRBB is a sealed mechanism that contains low viscosity oil. By being sealed it resists salt water and all types of debris, allowing of bearings to remain smooth and unhindered.

Also when you can buy any type the bearings to fixed you reel that bearing are not the quality and not oxidisation.

Daiwa and Shimano company are not to sell they product to any company!!