雲石塗-失敗

you are very close to success, but you should not use blue as the base because the rod is already black in colour. you should use orange as the base, and yellow on the surface. finish it off with a layer of epoxy.

a warning for you, epoxy is hard to handle. this is the most difficult part.

cheers! good luck!

好靚！

底油太厚﹐控制吾到﹐成功再同大家分享程序
41878
kfd 發表於 2008-6-7 08:56

                               
登錄/註冊後可看大圖

kfd兄.效果唔錯.