ISO rod for 前打

hi buddy,

if I am going to order a ISO rod for 前打, which rod length would be better, 4.5m or 5.3m ?

cheers

去直駁位 or 真正磯邊人工斜石駁玩?  點解吾買支打竿呢?

I only have limited budget, so I want to buy a rod that can do both

these areas the two spots I want to use that rod with, so which rod length is more preferable?

Thanks

不是香港?  Anyway ….建議用支一般的 5.3m磯竿就可以一物二用, 如果可以的話買支頭節軟身/敏感既磯竿仲可以玩埋直感.

yep....
not in HK, it's Adelaide, South Australia

one more question, is Daiwa Liberty 2-53 ISO soft enough to do both ?

Shimano Fireblood Tentacle

Daiwa OLEGA 一徹 KS-V

[ 本帖最後由 DriftsinkAngler 於 2008-3-7 11:02 編輯 ]

原帖由 even928 於 2008-3-7 10:17 發表

                               
登錄/註冊後可看大圖

yep....
not in HK, it's Adelaide, South Australia

one more question, is Daiwa Liberty 2-53 ISO soft enough to do both ?

not enough.

thanks for your suggestions, DriftsinkAngler....
those rods looks good....
but well above my budget...

my budget is no more than 9500 yen  >_<

Try to locate a rod with a tip of 0.7mm for #1.5. Normally the right choice!

thanks for your advice again ^^

when I'm looking at the spec. of Japanese rods, they have a section called 錘負荷, I wonder if that's mean the max. sinker weight that rod can sustain, am I right ? and how to convert the value from 号 to gram ?

Thanks

PS: sorry that I have so many questions >_<