邊位有玩過Fly Fishing請入黎報到!!

Hi Trouty,

Welcome

I've heard a few stories about fly fishing in Singapore. Those large milkfish are just amazing.
Please share some of your adventures and of coz your skills when you have time.

Jacky

Thanks Jacky,

Is it ok to write English in this forum? My chinese is not very good although I have been very active in the local mainland forums. I understands and speak Cantonese as well but I can't read it well as its written in 繁体 while the nomal chinese is written in 简体.
Haha the milkfish is all but gone now. More common species are the Peacock bass now.

cheers
trouty

you are always welcome to use English here. Please do give some advices to us as most of us started this sport not too long ago.

Last time I was in Singapore, I had seen many great places for fishing. Too bad I didnt bring my gears with me

西貢大浪西四叠潭, 風景極之優美, 釣點頗多
魚種由沙灘咸淡交小黃腳小紅鮋至上游溪哥
魚体雖細, 但仍是初學者的好去處
有時間更可在士多租房住一晚釣兩日

原帖由 keung 於 2007-9-15 00:08 發表

                               
登錄/註冊後可看大圖

西貢大浪西四叠潭, 風景極之優美, 釣點頗多
魚種由沙灘咸淡交小黃腳小紅鮋至上游溪哥
魚体雖細, 但仍是初學者的好去處
有時間更可在士多租房住一晚釣兩日 ...

非常同意,其實在於享受釣魚樂趣,並唔係魚獲,
所以小物都係好好玩

原帖由 onion 於 2007-8-21 08:06 發表

                               
登錄/註冊後可看大圖

係後無位!!!!!!!!

點解唔試下用roll cast, distance冇咁遠但都可以cast度ar

原帖由 ateamwilliam 於 2007-10-26 15:34 發表

                               
登錄/註冊後可看大圖

點解唔試下用roll cast, distance冇咁遠但都可以cast度ar

師兄,如果有時間就出多D資料俾各位有興趣嘅釣友參考吓喇

原帖由 naobao 於 2007-10-26 01:49 發表

                               
登錄/註冊後可看大圖

師兄,如果有時間就出多D資料俾各位有興趣嘅釣友參考吓喇

http://www.letsflyfish.com/rollcastmovie.htm
最低個動畫示範好清楚, 好易明

師兄﹐尼D片我都睇過 http://www.fishinghk.com/forum/v ... &extra=page%3D2
實際用起上尼﹐有幾個問題
如果係亂石駁釣﹐用上streamer 或其他 鹹水毛﹐ 好易“歐”石同耗殼﹐用浮水毛﹐又因距離近魚吾上水
師兄可吾可以講解下點樣配合下呢﹖

原帖由 kfd 於 2007-10-26 19:05 發表

                               
登錄/註冊後可看大圖

師兄﹐尼D片我都睇過 http://www.fishinghk.com/forum/viewthread.php?tid=6554&extra=page%3D2
實際用起上尼﹐有幾個問題
如果係亂石駁釣﹐用上streamer 或其他 鹹水毛﹐ 好易“歐”石同耗殼﹐用浮水毛﹐又因距離近魚吾上水
師 ...

其實我係fly 都好新手, 依個問題都考起我, 因為我每次都落水釣而且用float line, 所以我冇試過以上情形

如果你係陸上邊用roll cast當然唔得la, 你個鉤一定好易“歐”石同耗殼, 而且磨地增加磨擦力

恕我冇力答此問題la, sorry